dmesg - AMD FX-8350 Eight-Core
Linux version 4.16.13-200.fc27.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 7.3.1 20180303 (Red Hat 7.3.1-5) (GCC)) #1 SMP Wed May 30 15:03:53 UTC 2018
Command line: BOOT_IMAGE=/vmlinuz-4.16.13-200.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
random: get_random_u32 called from bsp_init_amd+0x25d/0x2a0 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bdde0fff] usable
BIOS-e820: [mem 0x00000000bdde1000-0x00000000be461fff] reserved
BIOS-e820: [mem 0x00000000be462000-0x00000000be851fff] ACPI NVS
BIOS-e820: [mem 0x00000000be852000-0x00000000bee14fff] reserved
BIOS-e820: [mem 0x00000000bee15000-0x00000000bee15fff] usable
BIOS-e820: [mem 0x00000000bee16000-0x00000000bf01bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf01c000-0x00000000bf442fff] usable
BIOS-e820: [mem 0x00000000bf443000-0x00000000bf7f2fff] reserved
BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000033fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x82fce018-0x82fed857] usable ==> usable
e820: update [mem 0x82fce018-0x82fed857] usable ==> usable
e820: update [mem 0x82fc0018-0x82fcd057] usable ==> usable
e820: update [mem 0x82fc0018-0x82fcd057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x0000000082fc0017] usable
reserve setup_data: [mem 0x0000000082fc0018-0x0000000082fcd057] usable
reserve setup_data: [mem 0x0000000082fcd058-0x0000000082fce017] usable
reserve setup_data: [mem 0x0000000082fce018-0x0000000082fed857] usable
reserve setup_data: [mem 0x0000000082fed858-0x00000000bdde0fff] usable
reserve setup_data: [mem 0x00000000bdde1000-0x00000000be461fff] reserved
reserve setup_data: [mem 0x00000000be462000-0x00000000be851fff] ACPI NVS
reserve setup_data: [mem 0x00000000be852000-0x00000000bee14fff] reserved
reserve setup_data: [mem 0x00000000bee15000-0x00000000bee15fff] usable
reserve setup_data: [mem 0x00000000bee16000-0x00000000bf01bfff] ACPI NVS
reserve setup_data: [mem 0x00000000bf01c000-0x00000000bf442fff] usable
reserve setup_data: [mem 0x00000000bf443000-0x00000000bf7f2fff] reserved
reserve setup_data: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100001000-0x000000033fffffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xbe841000 ACPI 2.0=0xbe841000 SMBIOS=0xf04c0 MPS=0xfc090
secureboot: Secure boot disabled
random: fast init done
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./970A-G/3.1, BIOS P1.20 01/12/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000340000000 aka 13312M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fc4c0-0x000fc4cf] mapped at [ (ptrval)]
Base memory trampoline at [ (ptrval)] 98000 size 24576
Using GB pages for direct mapping
BRK [0x32ea7c000, 0x32ea7cfff] PGTABLE
BRK [0x32ea7d000, 0x32ea7dfff] PGTABLE
BRK [0x32ea7e000, 0x32ea7efff] PGTABLE
BRK [0x32ea7f000, 0x32ea7ffff] PGTABLE
BRK [0x32ea80000, 0x32ea80fff] PGTABLE
BRK [0x32ea81000, 0x32ea81fff] PGTABLE
BRK [0x32ea82000, 0x32ea82fff] PGTABLE
BRK [0x32ea83000, 0x32ea83fff] PGTABLE
BRK [0x32ea84000, 0x32ea84fff] PGTABLE
BRK [0x32ea85000, 0x32ea85fff] PGTABLE
BRK [0x32ea86000, 0x32ea86fff] PGTABLE
BRK [0x32ea87000, 0x32ea87fff] PGTABLE
RAMDISK: [mem 0x3cc10000-0x3e18cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BE841000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BE841078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BE847C08 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
ACPI: DSDT 0x00000000BE841178 006A90 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BE84B080 000040
ACPI: APIC 0x00000000BE847D18 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BE847DB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BE847E00 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BE847E40 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: AAFT 0x00000000BE847E78 000062 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: UEFI 0x00000000BE847EE0 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BGRT 0x00000000BE847F28 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BE847F60 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
NODE_DATA(0) allocated [mem 0x33ffd5000-0x33fffffff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000033fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000bdde0fff]
node 0: [mem 0x00000000bee15000-0x00000000bee15fff]
node 0: [mem 0x00000000bf01c000-0x00000000bf442fff]
node 0: [mem 0x00000000bf7f3000-0x00000000bf7fffff]
node 0: [mem 0x0000000100001000-0x000000033fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff]
On node 0 totalpages: 3137972
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12105 pages used for memmap
DMA32 zone: 774678 pages, LIFO batch:31
Normal zone: 36864 pages used for memmap
Normal zone: 2359295 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x82fc0000-0x82fc0fff]
PM: Registered nosave memory: [mem 0x82fcd000-0x82fcdfff]
PM: Registered nosave memory: [mem 0x82fce000-0x82fcefff]
PM: Registered nosave memory: [mem 0x82fed000-0x82fedfff]
PM: Registered nosave memory: [mem 0xbdde1000-0xbe461fff]
PM: Registered nosave memory: [mem 0xbe462000-0xbe851fff]
PM: Registered nosave memory: [mem 0xbe852000-0xbee14fff]
PM: Registered nosave memory: [mem 0xbee16000-0xbf01bfff]
PM: Registered nosave memory: [mem 0xbf443000-0xbf7f2fff]
PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ (ptrval) s147456 r8192 d28672 u262144
pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 3088915
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.13-200.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
Memory: 12054568K/12551888K available (12300K kernel code, 1568K rwdata, 3836K rodata, 2124K init, 1368K bss, 497320K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 36457 entries in 143 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 65792, nr_irqs: 1032, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180105
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 4000.197 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a9174ab25, max_idle_ns: 440795344683 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 8000.39 BogoMIPS (lpj=4000197)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (64003.15 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbe462000-0xbe851fff] (4128768 bytes)
PM: Registering ACPI NVS region [mem 0xbee16000-0xbf01bfff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 0:03:29, date: 06/11/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1528675408.066:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 11 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: enabling Extended Tags
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: enabling Extended Tags
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: enabling Extended Tags
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: enabling Extended Tags
pci 0000:00:15.3: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:03:00.0: [10de:1c82] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: BAR 3: assigned to efifb
pci 0000:03:00.1: [10de:0fb9] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:15.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:04:00.0: [1b6f:7052] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xfe100000-0xfe100fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.3: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x82fc0018-0x83ffffff]
e820: reserve RAM buffer [mem 0x82fce018-0x83ffffff]
e820: reserve RAM buffer [mem 0xbdde1000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbee16000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf443000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:03: [mem 0xffc00000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:15.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.3: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 22004K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xabc53000-0xafc53000] (64MB) mapped at [00000000cdc0cf4d-00000000c2cde4d8]
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
efifb: probing for efifb
efifb: framebuffer at 0xd1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.16.13-200.fc27.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.16.13-200.fc27.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.16.13-200.fc27.x86_64 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.16.13-200.fc27.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.16.13-200.fc27.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.16.13-200.fc27.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.16.13-200.fc27.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 8
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
xhci_hcd 0000:01:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.16.13-200.fc27.x86_64 xhci-hcd
usb usb8: SerialNumber: 0000:01:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.16.13-200.fc27.x86_64 xhci-hcd
usb usb9: SerialNumber: 0000:01:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:04:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x00000010
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.16.13-200.fc27.x86_64 xhci-hcd
usb usb10: SerialNumber: 0000:04:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 4 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.16.13-200.fc27.x86_64 xhci-hcd
usb usb11: SerialNumber: 0000:04:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: microcode updated early to new patch_level=0x06000852
microcode: CPU0: patch_level=0x06000852
microcode: CPU1: patch_level=0x06000852
microcode: CPU2: patch_level=0x06000852
microcode: CPU3: patch_level=0x06000852
microcode: CPU4: patch_level=0x06000852
microcode: CPU5: patch_level=0x06000852
microcode: CPU6: patch_level=0x06000852
microcode: CPU7: patch_level=0x06000852
microcode: Microcode Update Driver: v2.2.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (1196636892, 0)->(1369179758, -172542866)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: cf7f2bcedf47fa74dcd8cbec428ffae9a2470f4f'
Loaded UEFI:MokListRT cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42' linked to secondary sys keyring
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 6:335:51
memory memory83: hash matches
rtc_cmos 00:05: setting system clock to 2018-06-11 00:03:30 UTC (1528675410)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT03B6Q, max UDMA/133
ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] supports TCG Opal
sd 1:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 2124K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2012K
Freeing unused kernel memory: 260K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Timers.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Create list of required static device nodes for the current kernel...
audit: type=1130 audit(1528675410.694:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675410.695:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675410.731:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 4-2: new full-speed USB device number 2 using ohci-pci
audit: type=1130 audit(1528675410.779:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675410.791:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1528675410.791:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675410.802:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675410.808:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675410.865:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
scsi host4: pata_atiixp
scsi host5: pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0x00000000a6c441bb, 70:85:c2:4f:2e:d6, XID 0c000800 IRQ 35
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:05:00.0 enp5s0: renamed from eth0
usb 4-2: New USB device found, idVendor=045e, idProduct=07a5
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Microsoft® Nano Transceiver v2.1
usb 4-2: Manufacturer: Microsoft
input: Microsoft Microsoft® Nano Transceiver v2.1 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:045E:07A5.0001/input/input2
tsc: Refined TSC clocksource calibration: 4000.162 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a8f60323a, max_idle_ns: 440795359576 ns
clocksource: Switched to clocksource tsc
hid-generic 0003:045E:07A5.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.1] on usb-0000:00:12.0-2/input0
input: Microsoft Microsoft® Nano Transceiver v2.1 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:045E:07A5.0002/input/input3
hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.1] on usb-0000:00:12.0-2/input1
input: Microsoft Microsoft® Nano Transceiver v2.1 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:045E:07A5.0003/input/input4
MXM: GUID detected in BIOS
checking generic (d1000000 300000) vs hw (c0000000 10000000)
checking generic (d1000000 300000) vs hw (d0000000 2000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau 0000:03:00.0: NVIDIA GP107 (137000a1)
hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.1] on usb-0000:00:12.0-2/input2
nouveau 0000:03:00.0: bios: version 86.07.42.00.47
nouveau 0000:03:00.0: fb: 4096 MiB GDDR5
usb 4-3: new full-speed USB device number 3 using ohci-pci
usb 4-3: New USB device found, idVendor=04d9, idProduct=fa58
usb 4-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-3: Product: USB Laser Game Mouse
input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/0003:04D9:FA58.0004/input/input5
hid-generic 0003:04D9:FA58.0004: input,hidraw3: USB HID v1.10 Mouse [USB Laser Game Mouse] on usb-0000:00:12.0-3/input0
input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/0003:04D9:FA58.0005/input/input6
hid-generic 0003:04D9:FA58.0005: input,hidraw4: USB HID v1.10 Keyboard [USB Laser Game Mouse] on usb-0000:00:12.0-3/input1
input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.2/0003:04D9:FA58.0006/input/input7
[TTM] Zone kernel: Available graphics memory: 6131166 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:03:00.0: DRM: VRAM: 4096 MiB
nouveau 0000:03:00.0: DRM: GART: 536870912 MiB
nouveau 0000:03:00.0: DRM: BIT table 'A' not found
nouveau 0000:03:00.0: DRM: BIT table 'L' not found
nouveau 0000:03:00.0: DRM: TMDS table version 2.0
nouveau 0000:03:00.0: DRM: DCB version 4.1
nouveau 0000:03:00.0: DRM: DCB outp 00: 01000f42 04620030
nouveau 0000:03:00.0: DRM: DCB outp 01: 02011f62 04620010
nouveau 0000:03:00.0: DRM: DCB outp 02: 02822f76 04600020
nouveau 0000:03:00.0: DRM: DCB outp 03: 02022f72 04620020
nouveau 0000:03:00.0: DRM: DCB conn 00: 00001031
nouveau 0000:03:00.0: DRM: DCB conn 01: 00010161
nouveau 0000:03:00.0: DRM: DCB conn 02: 00020246
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:03:00.0: DRM: MM: using COPY for buffer copies
hid-generic 0003:04D9:FA58.0006: input,hiddev96,hidraw5: USB HID v1.10 Device [USB Laser Game Mouse] on usb-0000:00:12.0-3/input2
nouveau 0000:03:00.0: DRM: allocated 1920x1080 fb: 0x200000, bo 00000000d3963f27
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[242]: Received SIGTERM from PID 1 (systemd).
systemd: 17 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 109978 rules.
SELinux: 32768 avtab hash slots, 109978 rules.
SELinux: 8 users, 14 roles, 5115 types, 319 bools, 1 sens, 1024 cats
SELinux: 97 classes, 109978 rules
SELinux: Permission getrlimit in class process not defined in policy.
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: Class bpf not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=0
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 92.963ms.
systemd[1]: Relabelled /dev and /run in 26.248ms.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[604]: Received request to flush runtime journal from PID 1
systemd-journald[604]: File /var/log/journal/fcf0ad1953df41d297fea8c9f9c937a6/system.journal corrupted or uncleanly shut down, renaming and replacing.
acpi_cpufreq: overriding BIOS provided _PSD data
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use
sp5100-tco: probe of sp5100-tco failed with error -16
snd_hda_intel 0000:00:14.2: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Adding 6201340k swap on /dev/mapper/fedora-swap. Priority:-2 extents:1 across:6201340k SSFS
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:15.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:15.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:15.0/0000:03:00.1/sound/card1/input17
kauditd_printk_skb: 54 callbacks suppressed
audit: type=1130 audit(1528675414.829:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675414.832:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675414.855:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1528675414.855:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675414.863:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1528675416.051:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1528675416.397:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1528675416.428:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
r8169 0000:05:00.0 enp5s0: link down
r8169 0000:05:00.0 enp5s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
fuse init (API version 7.26)
r8169 0000:05:00.0 enp5s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
nouveau 0000:03:00.0: disp: 0x000061ec[0]: INIT_GENERIC_CONDITON: unknown 0x07
nouveau 0000:03:00.0: disp: 0x000061ec[0]: INIT_GENERIC_CONDITON: unknown 0x07
nouveau 0000:03:00.0: disp: 0x000061ec[0]: INIT_GENERIC_CONDITON: unknown 0x07
hrtimer: interrupt took 16600965 ns